Artifact Details

Title

Sigma 5 peripheral interface cable

Catalog Number

102731062

Type

Physical object

Date

1966 ca.

Manufacturer

Scientific Data Systems (SDS)

Identifying Numbers

Model number AT11 Silkscreened on the right front corner of the component side of the AT11 module
Other number 116527B Typed on a white label on the left edge of the component side of 3 of the AT11 modules
Other number 116527C Silkscreened in white on the left edge of the component side of 2 of the AT11 modules
Other number 116527D Silkscreened in white on the left edge of the component side of 1 of the AT11 modules
Other number 123019 Silkscreened on the right front corner of the component side of the AT11 module and denoted "assy no"

Dimensions

AT11 module: 7/8 in x 4 1/4 in x 5 1/2 in; cable1: 215 in x 3/8 in x 3/8 in; cable2: 356 in x 3/8 in x 3/8 in; cable3: 120 in x 3/8 in x 3/8 in; cable4: 17 in x 3/8 in x 3/8 in; cable5: 99 in x 3/8 in x 3/8 in

Description

This object consists of 5 sections of cable connecting 6 standard size SDS printed circuit modules in a daisy chained manner. Each cable contains 14 shielded signal wires. All 6 modules have a copyright label of "SDS-65". All 6 modules are AT11 "CABLE DRIVER RECEIVER" modules. Each module has an attached paper tag with a hand written label. The table below list the modules in the order they occur in the cable:

Type Cables Label
AT11 1 RAD Gate1 C30
AT11 1/2 TAPE Gate3 E30
AT11 2/3 Unit5 Gate2 B8
AT11 3/4 Unit4 Gate2 G30
AT11 4/5 Unit4 Gate2 I30
AT11 5 Unit4 Gate1 G30

Category

Component/cable