Artifact Details

Title

Fabricated power cable

Catalog Number

102733200

Type

Physical object

Manufacturer

Digital

Identifying Numbers

Other number 020 Printed on a white sticker near the plug end of the cable; labeled "Date."
Other number 36-24502-01-B01 Printed on a white sticker near the plug end of the cable; no label.
Part number 17-02436-01 Printed on a white sticker near the plug end of the cable; labeled "P/N."

Dimensions

overall: 2 1/4 in x 2 1/4 in x 222 in

Description

This power cable consists of two 10 AWG 3-conductor shielded cables, each of which has a red, a black, and a green-with-yellow-stripe conductor. One end is terminated with a 6-contact male threaded Amphenol connector with a round metal body. The two cables are held together with black heat-shrink tubing near where they enter the clamp of the connector. Four conductors (also in heat-shrink tubing) in emerge from the tubing and are connected with ring terminals to the screws of the clamps. A white label wrapped around one of the cables labeled "DIGITAL" provides that company's information about the power cable. Cable ties positioned about every foot along the length of the cables keeps them together.

At the end opposite the connector, the green/yellow conductors extend a few inches from the cable and are terminated with spade lugs. The red and black conductors extend an average of 20" from the cable and are also terminated with spade lugs. Wrapped around each of these wires there is a wire ID label near the spade lugs.

Category

Component/cable