TitlePopulated breadboard module
|Other number||296||Written in pencil on a white paper label stuck to the right of the 50-pin connector looking in the direction of insertion.|
|Other number||39Y||Written in pencil on a white paper label stuck to the left of the 50-pin connector looking in the direction of insertion.|
Dimensionsoverall: 3/4 in x 6 in x 8 1/2 in
DescriptionThis object has a two-row 50-pin connector on one end that is connected by solder traces to 50 holes. A double row consisting of 47 bifurcated contacts is mounted on the opposite end of the PCB, connected to similar traces. A network of other traces connect the pins of fourteen 16-pin dual inline IC pad to the pins of one or more other IC pads, as well as holes for mounting passive components. There are several common busses that pass all the IC pads.
Nine pads on this object have IC sockets that are populated with IC packages. Thin pink wires connect the traces from the connector to holes provided near the sockets and both connectors. Diodes and resistors are soldered in other holes. A power transistor and several associated components are mounted near the contact end of the board.