Title
LattisNet 3313SA Ethernet network management module
Catalog Number
102735328
Type
Physical object
Description
This object is a thin, vertically mounted plug-in module that consists of a front panel and a metal sheet that covers the entire right side of the module. The circuit board is mounted with the circuit side of the board toward this cover. The entire component side of the board is covered with active and passive components, integrated circuits of many different sizes, jumper blocks with jumpers, a small toroidal inductor, and two crystals (10 MHz and 20 MHz). The back of the module is open and supports a pair of 96 contact female connectors. The front of the module is a panel which supports the following hardware from top to bottom: 11 small status LEDs, a single led labeled "Part," 15-contact female DB connector ("AUI Port"), a 4-digit alphanumeric display ("System Operation"), a 9-contact male DB connector ("Service Port"), a 25-pin male DB connector ("RS-232"), and a small hole labeled "Reset" that provides access to a button mounted on the circuit board. Captive screws at the top and bottom of the front panel hold the module in place, and a plastic lever at the bottom is provided to aid in extracting the module.
Manufacturer
SynOptics Communications, Inc.
Place Manufactured
U. S.
Identifying Numbers
| Model number |
3313SA |
Printed in black ink under 'LatticeNet' at the top of the front panel. |
| Other number |
*2697544* |
Printed in black ink on an orange sticker, along with a bar code, on the bottom of the component side of the circuit board. |
| Other number |
0201953313SSA |
Printed in black ink on a white sticker, also with a bar code, attached to the upper left corner of the right panel. |
| Other number |
098807 |
Printed on a silver sticker located at the bottom of the front panel. |
| Other number |
920-324-A |
Printed in white ink/handwritten in black pen on the bottom of the component side of the circuit board. |
| Other number |
A2056 |
Printed (dot matrix) in black ink on a white sticker attached to the top of the component side of the circuit board. |
| Other number |
B2087 |
Printed (dot matrix) in black ink on a white sticker attached to the top of the component side of the circuit board. |
| Other number |
DEV.1826 |
Printed in black ink on a white label attached to the bottom of the component side of the circuit board. |
| Other number |
S1474 |
Printed (dot matrix) in black ink on a white sticker attached to the top of the component side of the circuit board. |
Dimensions
overall: 15 in x 1 1/4 in x 11 1/2 in
Category
Networking/controller
