The record contains and unpopulated circuit board with solder traces throughout on both sides. There is a metal boarder along the top insertion edge and the two side edges. There are flat insertion connector pins along the bottom edge. On one side there is a white sticker label in the left corner along the extraction edge which reads "w/ tin lead after reflow."
Date
1982
Manufacturer
Data General Corporation (DGC)
Identifying Numbers
Other number
1070220705
Rev number located along the extraction edge on both sides of the board.
Other number
107177302
Seen through the board at the insertion end of the board.
Other number
2
Layer number located on the extraction edge on one side.
Other number
3
Set number located on the extraction edge of the board on both sides.
Other number
773636802371914
Stamped into the metal in the left corner of the extraction edge.
Other number
DGC 12VO
Printed in solder on side 2 of the board in the corner at the extraction edge.
Other number
FO6368
Printed in solder on side 2 of the board in the corner at the extraction edge.
Part number
1773
Etched along the extraction edge on both sides of the board.
Serial number
9)
Printed along the extraction edge of one side of the board.