TitleWirewrapped PC board
|Other number||10888-1C||Printed on component side near connector|
|Serial number||1009||Printed on component side near connector|
Dimensionsoverall: 15 in x 15 in x 1 in
DescriptionThis is a wire wrap board loaded with both 16 pin and 24 pin DIP sockets. None of the sockets are loaded with parts, and there are no wires.
The board has two edge connectors at one end with 50 pins in etch on both sides of the board. There are fiberglass stiffeners between the two connectors, along the board edge that has the connectors, and along the opposite edge of the board.
The board accommodates two arrays of 10 by 12 16pin sockets and 8 24 pin sockets. There are also spaces for 10 16pin DIP sockets along the edge opposite the connectors.
There is a notation on the stiffener opposite the edge connector that says "BRD 1", and extractor handles on both corners of the edge connector edge.
There is a blue label that says accepted, and has a date of "10/11/72", part# "11145 D", serial# "1009", and part name "Mag Tape".
CreditGift of Jean Astrin Ichnowski
|102751919||Unicomp Comp 18 rack|