This object is an injection molded plastic case with a split rectangular ridge molded in the top section surrounding the 'Digital' logo. There is a yellow 'antistatic' warning label mounted in a molded recess to the right of the ridge, and a yellow 'attention' warning label placed above the logo. Two snap-style catches are molded in the front of the case to hold the lid closed, and a molded hinge is located on the opposite side. Between the catches are indentations allow for a small lip on the inside edges of the top and bottom, into which small holes are drilled to provide a means to secure or lock the case. A single male snap is attached to each side, toward the back on the left side and toward the front on the right side. A pattern that resembles a square is molded on the top and bottom of the inside of the case. Protuberances on opposite corners of the top of the case mate with indentations on the bottom. A round indentation filled with a waxy substance is molded in the top and bottom halves.
Manufacturer
Airmold
Identifying Numbers
Model number
99-08606-01 Rev A
Molded in the bottom of the plastic case.
Other number
36-24278-03-B1
Printed in black ink on a yellow warning label on top of the case; probably the part number of the label.
Other number
36-24513-01
Printed in black ink on a yellow warning label on top of the case; probably the part number of the label.
Other number
C010007.8 / CT02000009
Written with a black felt tip pen on the file folder label attached to one of the sides of the case.
Other number
P1014-AA.F02
Written with a black felt tip pen on a file folder label attached to one of the sides of the case.