The object is a long black rubber low voltage cable for use with AVID mac based editing system. At one end (A), there is a male 10 pin connector, which is made of silver metal. On either side of the connector there screws to connect to the machine and "JSP" is printed into the metal on one side. Close to the connector there is a white translucent piece of tape that says, "A: To video signal source". "AWM STYLE 2912 30v 80C E101344 VW1 LOW VOLTAGE COMPUTER CABLE" is printed in white 14 times along the length of the cable. There is a second piece of tape toward the center of the cable that says, "20" Monitor cable (#180 REV2) 0070-00227-01 cts 5296". This same sticker is repeated near the other end of the cable. The fourth and an final piece of tape is and the far end (B). This third piece of tape says, "B: to rbs (5) inputs on 20"monitor". Extending from the B end are four circular connectors with a pin in the middle. The wires holding those connectors are blue, black, red and green.
Identifying Numbers
Other number
0070-00227-01 cts 5296
Printed on second white sticker
Other number
15P
Pressed into the metal of the silver connector.
Other number
2919
The number i sprinted several time along the length of the cable.
Other number
E101344
The number is printed several timeas along the length of the table
